Battery Internal Resistance Meter YR1035 +
The device is used to measure the internal resistance of cells, batteries, resistors and other components.
Price excl. VAT: 1,652.07 Kč
- Dimensions (W × H × D)
- 74 × 142 × 27 mm
- 196 g
- Measuring range
- 0,01 mΩ ~ 200 Ω; 0 V ~ 100 V DC
Model: YR1035 +
Weight: 196 g
Weight including probes: 236 g
Case material: ABS
Operating voltage / charging: 5 V
Maximum charging current: 2 A
Measuring range: 0.01 mΩ ~ 200 Ω; 0 V ~ 100 V DC
Probe cable length: approx. 75 cm
Operating temperature range: 10 ° C ~ 40 ° C at relative humidity up to 90%
Dimensions (W × H × D): 74 × 142 × 27 mm
Four-wire and four-point 1 kHz AC-sinusoidal digital meter of internal resistance and battery voltage in the range of 0.00001 Ω to 200 Ω and 0 V to 100 V, designed for measuring batteries of type Pb, Li-Ion, Ni-MH, Li-Pol, LiFePO4, Ni-H2, Ni-Cd, as well as alkaline and dry cells, button cells, resistors, etc.
The device is used to measure the internal resistance of batteries and voltages of a maximum of 100 V and only direct current. The device can also measure the resistance of resistors in the circuit and other components. In this case, make sure that such a circuit is not under load. Failure to follow these instructions may result in irreversible damage to the device.
Accuracy of internal resistance measurement
|Range:||Minimum resolution value:||Accuracy ± ([percentage accuracy] + [least significant digit]:|
|20 mΩ||0,01 mΩ||0,7% + 7 (if ZR function is enabled)|
|200 mΩ||0,1 mΩ||0,5% + 5|
|2Ω||1 mΩ||0,5% + 5|
|20Ω||10 mΩ||0,5% + 5|
|200 Ω||0,1 Ω||0,6% + 5|
If the measured resistance values are lower than 5% and higher than 95% of the preset measuring range, the accuracy may be lower than indicated.
Voltage measurement accuracy
|Range:||Minimum resolution value:||Accuracy ± (% of reading + % of range)|
|1 V||0,00001 V||0,35 + 0,015|
|10 V||0,0001 V||0,30 + 0,010|
|100 V||0,001 V||0,30 + 0,015|
8 other products in the same category:
Connecting accessories for high current loads.
The device measures the actual parameters of batteries, power supplies, chargers, etc.
The LCD touchscreen display serves as the display peripheral for the JBD brand BMS device, designed for use in the production of assembled lithium batteries. In the list below, choose the appropriate type of display communication with BMS that you require, either UART or RS485.
*Product image is for illustration purposes only
Industrial power connectors DC, QLB SurLok 120A 1000V. 2× plugs (2x male) of cable connectors included.
Connecting accessories for high current loads in the form of an orange and black plug with IP 67 protection. It is the counterpart of an industrial connector with a contact diameter of 5.7 mm, rotatable at an angle of 360°, which eliminates the use of screws, nuts and washers, including the relevant installation tool. The plug includes a lock with a push-release button.
Optionally, in the menu below, you can choose to supply the connectors with a silicone, fine-stranded 4AWG cable terminated with an M8 lug.
*product photo is illustrative
Can be used to connect battery to other accessories.