Battery Internal Resistance Meter YR1035 +

Technical specifications

Model: YR1035 +

Brand: YAOREA

Weight: 196 g

Weight including probes: 236 g

Case material: ABS

Colour: black

Operating voltage / charging: 5 V

Maximum charging current: 2 A

Measuring range: 0.01 mΩ ~ 200 Ω; 0 V ~ 100 V DC

Probe cable length: approx. 75 cm

Operating temperature range: 10 ° C ~ 40 ° C at relative humidity up to 90%

Dimensions (W × H × D): 74 × 142 × 27 mm

Four-wire and four-point 1 kHz AC-sinusoidal digital meter of internal resistance and battery voltage in the range of 0.00001 Ω to 200 Ω and 0 V to 100 V, designed for measuring batteries of type Pb, Li-Ion, Ni-MH, Li-Pol, LiFePO4, Ni-H2, Ni-Cd, as well as alkaline and dry cells, button cells, resistors, etc.

The device is used to measure the internal resistance of batteries and voltages of a maximum of 100 V and only direct current. The device can also measure the resistance of resistors in the circuit and other components. In this case, make sure that such a circuit is not under load. Failure to follow these instructions may result in irreversible damage to the device.

Accuracy of internal resistance measurement

If the measured resistance values are lower than 5% and higher than 95% of the preset measuring range, the accuracy may be lower than indicated.

Voltage measurement accuracy