There are 133 products.
The device is used to measure the internal resistance of cells, batteries, resistors and other components.
Device designed for charging LiFePO4 cells.
*image for illustration only, actual product may vary
Device designed for charging LiFePO4 cells.
*image for illustration only, actual product may vary
The device measures the actual parameters of batteries, power supplies, chargers, etc.
Regulated laboratory power supply with precisely adjustable DC current and voltage. Not intended for battery charging. Damage to the product will occur in the event of such a sustained load.
Device designed for charging LiFePO4 and Li-Ion cells.
We recommend plugging this charger into an electrical circuit protected by a circuit breaker with C characteristic.
*image for illustration only, actual product may vary
Device designed for charging LiFePO4 and Li-Ion cells.
*image for illustration only, actual product may vary
Device designed for charging LiFePO4 and Li-Ion cells.
*image for illustration only, actual product may vary
Device designed for charging LiFePO4 cells.
*image for illustration only, actual product may vary
LCD for BMS by JIKONG. Touch screen display with RS485 communication.
TOMZN TPNL-32 C16 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
TOMZN TPNL-32 C10 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
TPNL-32 C25 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
The TZG40-PV 1000VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The TZG40-PV 800VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The TZG40-PV 500VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The single-button LCD display serves as the display peripheral for the JBD brand BMS device, designed for use in the production of assembled lithium batteries. In the list below, choose the appropriate type of display communication with BMS that you require, either UART or RS485.
*Product image is for illustration purposes only
TheLCD touchscreen is used as a display peripheral of the JBD BMS for use in the production of lithium composite batteries.
*Product photo is illustrative
TZG40-C 275VAC is a device for surge protection of the network and lightning.
TOM7Z is an MCCB circuit breaker for photovoltaic system overload and short circuit protection.
This jumper serves as a connecting material for LiFePo4 27Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePo4 105Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for Li-Ion 218Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 50Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 187Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 230Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 304Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for Li-Ion 100Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 120Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 134Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 32Ah cells.
This jumper serves as a connecting material for Li-Ion 58Ah cells.
This jumper serves as a connecting material for LiFePO4 20Ah cells. No need to buy AL-CU (CUPAL) washers.
High precision battery discharge/charge testing device with a wide range of 9V-99V voltage detection.
Communication cable with USB port and UART for DALY Smart BMS.
Communication cable with USB port and RS485 for DALY Smart BMS.
External WiFi module with Bluetooth for DALY Smart BMS.
Wired remote control LCD panel with anti-interference protection and LAN connection. For mivvyENERGY voltage converters.
Colour 2.2" LCD for BMS by JIKONG with metal bracket and connecting cable.
Black ABS plastic box for battery set assembling.
Black ABS plastic box for battery set assembling.
Black ABS plastic box for battery set assembling.
Black ABS plastic box for battery set assembling.
Accessories for fixing cylindrical accumulators type 21700 to the group
Accessories for fixing cylindrical accumulators type 21700 to the group
Accessories for fixing cylindrical batteries type 60130 to the group
This jumper serves as a connecting material for LiFePO4 280Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePo4 22Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 125Ah cells. No need to buy AL-CU (CUPAL) washers.
Multimeter VC833A, digital meter for testing and measuring AC/DC values, with NCV and TrueRMS functions and flashlight.
Fibre reinforced adhesive tape for batteries, filament, width 25mm, 50m length, transparent.
Multimeter VC833A, digital meter for testing and measuring AC/DC values, with NCV and TrueRMS functions.
Cable end with lug. For M8 terminals and cables with 35mm² diameter.
Self-adhesive paper insulation for a set of 4 18650 battery cells.
Self-adhesive paper insulation for individual 18650 battery cells.
Insulating paper for 18650 batteries, self-adhesive, 8,5cm wide.
Connecting strip made of pure nickel, size 5×0,15×200mm for spot welding of batteries. The package contains 50pcs of these strips.
Connecting strip made of pure nickel, size 10×0,15×200mm for spot welding of batteries. The package contains 50pcs of these strips.