• Bluetooth
    AkuBox LiFePO4 460Ah 12,80V 5,88kWh
    JK-bms-app
    JK-bms-iOS

Reliable AkuBoxes® mivvyENERGY

Get a reliable power source for your projects with our compact lithium batteries in the AkuBox®. These battery packs have high capacity and long life. Whether you are creating electronic devices or setting out to build solar systems, our batteries will always provide you with plenty of power.

mivvy ENERGY

Features

Dimensions (W × H × D)
640 x 245 x 220 mm
Weight
38Kg
Energy
5.88kWh
Rated capacity
460Ah
Nominal voltage
12.80V
Connectivity
Smart Bluetooth
Box material
black plastic
System voltage
12V

Download

UM - AkuSet/AkuBox

UM - AkuSet/AkuBox

Download (1.1M)

Energy nominal: 5.88kWh

Usable energy: 4.70kWh

Nominal voltage: 12.80V

End charging voltage: 14V

End discharge voltage or reaching 0% SOC 12.60V

Maximum allowable voltage range 100% DoD If exceeded, the BMS will disconnect the battery: 12V-14.40V

Nominal capacity: 460Ah

Usable capacity: 368Ah

Maximum charging current (continuous): 100A

Maximum discharge current (continuous): 200A

Maximum discharge current (instantaneous): 350A (3 sec.)

Active current balancing: Yes 2A

When the max instantaneous current is exceeded, the battery will shut down

Charge/discharge cycle efficiency: 97%

Lifetime: 4000 cycles at 80% DoD

Degree of protection: IP21

Weight: 38Kg

Dimensions: W x H x D mm 640×245×220mm

Cell Composition: LIFEPO4

Operating temperature (recommended for full cycling life): 10-25°C

Operating temperature (max. range): 0-45°C

The battery is designed for indoor installation and the protective BMS will shut it down when charging below 0 degrees Celsius.

The package contains: AkuBox


Multiple AkuBoxes cannot be connected in series

JK APP JK APP

This app (QR code leads to the source of the app; it is a third party product) only allows monitoring of processes such as charging, discharging and balancing cells. However, we do not guarantee that this app will be functional in all devices in relation to their operating system version and other parameters. As this is a third party add-on and solution that is not strictly necessary for the actual operation of the device, we do not accept any liability for any malfunction of the device or for any consequential damage to the device, property or personal health.


The BMS is set to specific parameters from the factory. Any unprofessional intervention or alteration of the set parameters will result in permanent damage to the product and loss of warranty.

8 other products in the same category: