BMS charging cut-off voltage: < 58.4 V (3.65 V / cell)
Reconnect voltage: > 57.6 V (3.6V / cell)
Balancing voltage: < 57.6 V (3.6 V / cell)
Maximum continuous discharge current: 100 A / 1C
Maximum discharge current (3 seconds): 110 A / 1.1C
BMS discharge cut-off current: 150 A / 1.5C (300ms)
Balancing open voltage: 55.2 V (3.45 V / cell)
Recommended low voltage disconnect: 44.0 V (2.75 V / cell)
BMS discharge cut-off voltage: > 32.0 V (2s) (2.0 V / cell)
Reconnect voltage: > 40.0 V (2.5 V / cell)
Short circuit protection: 250 μs ~ 500 μs
Certifications: CE (battery), UN38.3 (battery), UL1642 & IEC62133 (cells)
Shipping classification: UN 3480, class 9
Dimension (W x H x D): 580 × 400 × 145 mm
Weight: approx. 44.0 kg
Terminal type: DIN POST
Terminal torque: 9 Nm ~ 11 Nm
Case material: SPPC
Enclosure protection: IP 20
Operating temperature / discharge: -20 °C ~ 55 °C
Operating temperature / charging: 0 °C ~ 45 °C
Storage temperature: -5 °C ~ 35 °C
BMS high temperature cut-off: 65 °C
Reconnect temperature: 55 °C
Heating foil temperature range: -20 °C ~ 5 °C
Foil heating time: approx. 1 hour @ 7.5 A
BMS heating foil cut-off: 70 °C
Included in the package: device, manual, bracket for hanging on the wall
The following picture shows the wiring method. For a complete home PV system, you need a voltage converter in addition to the solar panels and this battery.
This MUST battery from the LP1600 series has a built-in BMS (battery management system) so you can manage and monitor voltage, current, temperature and other battery information. The BMS also provides active protection functions such as over-discharge, over-charge, over-temperature and over-current protection.
The device supports CAN or RS485 communication for battery upgrades. The battery chemistry is LiFePO4, the battery can benefit from the advantageous properties of such designed batteries such as long life and safety of use. The system can automatically control the charging, discharging and voltage balancing of each battery cell.
Advantages of the LP1600 series wall battery
the battery cells are initialized
suitable for use in more temperature demanding applications where the ambient temperature reaches up to +60°C.
low self-discharge rate, no memory effect
low weight, compact design and small size
flexible configuration of modules in parallel to expand capacity and power
Professional traction LiFePO4 mobile battery module including BMS, which offers a simple capacity expansion through a modular design (up to 2 modules of a same kind). Power connection cables can be purchased as accessories.
The MUST HBP1800 is a modular All in One home solar energy storage system, including a 5kw 48vdc inverter and LiFePO4 batteries with selectable energy of 5-25kWh.
Professional traction LiFePO4 mobile battery module including BMS, which offers a simple capacity expansion through a modular design (up to 2 modules of a same kind). Power connection cables can be purchased as accessories.
Modular energy storage system Must LP1900 series. Lithium battery (LiFePO4) capacity can be increased freely according to the situatuion. Modular with multiple energy storage options through an expandable modular design – max 5 modules combined.