White DIY pocket mini power bank and battery charger for 1×Li-Ion 18650 battery (battery not included) with USB and Micro USB ports.
Accessories
Needs for wiring and optimal performance of your devices and batteries. Explore our range of BMS and balancers, chargers, power supplies and testers and many other accessories. With our products, you'll always have the confidence that your equipment will operate flawlessly and safely.
There are 63 products.
Blue DIY pocket mini powerbank and battery charger, for one 18650 Li-Ion cell (battery not included) with USB and Micro USB ports.
Black DIY pocket mini powerbank and battery charger, for one 18650 Li-Ion cell (battery not included) with USB and Micro USB ports.
Black pocket mini powerbank and DIY battery charger, for two 18650 Li-Ion cells (battery not included) with USB and Micro USB ports.
White pocket mini powerbank and DIY battery charger, for 2× Li-Ion 18650 (battery not included) with USB and Micro USB ports.
Blue pocket mini powerbank and DIY battery charger, for 2× Li-Ion 18650 cells (battery not included) with USB and Micro USB ports.
Black ABS plastic box for battery set assembling.
Black plastic box for battery production.
TOMZN 1P MCB DC 250V 200A overload circuit breaker for DC solar photovoltaics.
*Product photo is illustrative
TOMZN 1P MCB DC 250V 125A overload circuit breaker for DC solar photovoltaics.
*Product photo is illustrative
TOMZN 2P MCB DC 600V 125A overload circuit breaker for DC solar photovoltaics.
*Product photo is illustrative
TOMZN 10x38mm 1000V 10A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
TOMZN 10x38mm 1000V 15A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
TOMZN 10×38mm 1000V 20A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
TOMZN 10×38mm 1000V 30A cylindrical fuse is a high voltage fuse designed specifically for the protection and isolation of photovoltaic strings in solar systems.
*Product photo is illustrative
Fuse disconnector TOMZN DC 1P serves for retention of DC fuse 10x38mm. Suitable for electrical distribution of high voltage solar photovoltaics. It serves as a basic protection of gpV photovoltaic system.
*product photo is illustrative
Fuse parallel disconnector TOMZN DC 2P is used for retention of DC fuses 10x38mm. Suitable for electrical distribution of high voltage solar photovoltaics. It serves as the basic protection of the gpV photovoltaic system.
Fuse disconnector TOMZN 4P PV DC 1200V 32A is a device designed for solar switchboards. It is equipped with a flexible and durable rotating handle.
The TOMZN three-phase electricity meter with Wifi function is a modern device for monitoring electricity consumption. It features an intelligent bidirectional energy meter with timer function and kWh consumption monitoring.
*product photo is illustrative
TOMZN TPNL-32 C16 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
TOMZN TPNL-32 C10 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
TPNL-32 C25 is a circuit breaker for single-phase distribution with AC 50-60Hz and 230V. It protects against overload and short circuit.
The TZG40-PV 1000VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The TZG40-PV 800VDC is a surge protection device with even faster protective response in the event of a lightning strike.
The TZG40-PV 500VDC is a surge protection device with even faster protective response in the event of a lightning strike.
TZG40-C 275VAC is a device for surge protection of the network and lightning.
TOM7Z is an MCCB circuit breaker for photovoltaic system overload and short circuit protection.
This jumper serves as a connecting material for LiFePo4 27Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePo4 105Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for Li-Ion 218Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 50Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 187Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 230Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 304Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for Li-Ion 100Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 134Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 20Ah cells. No need to buy AL-CU (CUPAL) washers.
Wired remote control LCD panel with anti-interference protection and LAN connection. For mivvyENERGY voltage converters.
Black ABS plastic box for battery set assembling.
Black ABS plastic box for battery set assembling.
Black ABS plastic box for battery set assembling.
Black ABS plastic box for battery set assembling.
This jumper serves as a connecting material for LiFePO4 280Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePo4 22Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 125Ah cells. No need to buy AL-CU (CUPAL) washers.
Connecting strip made of pure nickel, size 5×0,15×200mm for spot welding of batteries. The package contains 50pcs of these strips.
Connecting strip made of pure nickel, size 10×0,15×200mm for spot welding of batteries. The package contains 50pcs of these strips.
Soldering tip 900M-T-K, with an angled tip length of 0.5mm at a 45° angle, which is compatible with most of the most commonly used microstrips and soldering pens.
Soldering tip 900M-T-B with tip R=0,5mm for precision soldering, compatible with most traditional soldering stations and microsoldering stations.
This jumper serves as a connecting material for LiFePO4 32Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 196Ah cells. No need to buy AL-CU (CUPAL) washers.
This jumper serves as a connecting material for LiFePO4 120Ah cells. No need to buy AL-CU (CUPAL) washers.
DIY large capacity power bank with LCD display for 10 Li-Ion 18650 cells (not included).
DIY wireless power bank with LCD display for 5 Li-Ion 18650 cells (not included).
DIY 12-cell Li-Ion 18650 wireless power bank with LCD display, including USB-C, Micro-USB, Lightning and 2× USB ports.
DIY power bank with LCD display for 21 Li-Ion 18650 cells (batteries not included).
Wireless magnetic DIY power bank in black, for 4 Li-Ion 18650 cells (not included).
Wireless magnetic DIY power bank in blue, for 4 Li-Ion 18650 cells (not included).
Wireless magnetic power bank from DIY in black, for 8 Li-Ion 18650 cells.
DIY wireless magnetic power bank in blue for 8 Li-Ion 18650 cells (not included).